FIDC X600 User Instructions

Loading ...

EN 4

and cause the glass to shatter.

• The oven must be switched o before removing the removable

parts. After cleaning, reassemble them according the instruc-

tions.

• Only use the meat probe recommended for this oven.

• Do not use a steam cleaner or high pressure spray for cleaning

operations.

• IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITH-

OUT PLUG:

THE APPLIANCE MUST NOT BE CONNECTED TO THE POW-

ER SOURCE USING PLUG OR SOCKETS, BUT MUST BE DI-

RECTLY CONNECTED TO THE SUPPLY MAINS. The con-

nection to the power source must be carried out by a suitably

qualied professional. In order to have an installation compliant

to the current safety legislation the oven must be connect-

ed only placing an omnipolar breaker, with contact separation

compliant to the requirements for overvoltage category III,

between the appliance and the power source. The omnipolar

breaker must bear the maximum connected load and must be

in line with current legislation. The yellow-green earth cable

should not be interrupted by the breaker. The omnipolar break-

er used for the connection must be easily accessible when the

appliance is installed.

The connection to the power source must be carried out by a

suitably qualied professional considering the polarity of the

oven and of the power source.

The disconnection must be achieved incorporating a switch in

the xed wiring in accordance with the wiring rules

• IF THE OVEN IS PROVI ED BY THE MANUFACTURER WITH

PLUG:

The socket must be suitable for the load indicated on the tag

and must have ground contact connected and in operation.

The earth conductor is yellow-green in colour. This operation

should be carried out by a suitably qualied professional. ln case

Loading ...

Candy FIDC X600 65L Built-In Electric Single Oven