Loading ...
Loading ...
Loading ...
-28-
Boundary Strip Installation Instructions
1. Identify the area or item where you want to install the boundary strips.
2. If necessary, use scissors to cut the boundary strip to a shorter length. Be sure
to correctly measure the length before cutting. Do not try and reduce the width
of the boundary strips by cutting.
3. Apply adhesive tape to lay the boundary strip at on the oor. Make sure the
strip is placed at on the oor or under a rug.
NOTE:
Make sure the boundary strip is placed on the same surface plane the
robot is used on. Be careful not to damage the oor when using adhesive tape.
It is not recommended for use on carpets. Keep the boundary strip away from
objects that emit excessive heat.
3. Hair and dust can become tangled in the front swivel wheel. Remove the swivel
wheel from the unit and clean.
NOTE:
Reinstall the wheel onto the robot after cleaning and ensure it is fully
and securely locked into place.
Anti-drop Cliff
Sensors
Loading ...
Loading ...
Loading ...