Loading ...
Loading ...
Loading ...
©2023 SwellPro All Rights Reserved 41
16. After landing, keep the left(throttle) joystick down to its lowest position for 3
seconds until the motors stop, or you can use the disarm joystick command to stop
the motors.
17. Stop video recording before shutting down the drone, otherwise, the video file may
be damaged.
Starting/Stopping Motors (Arming the Drone)
Before starting the drone, take the following precautions:
1. Place the aircraft in an open area 3 meters away from yourself and others. After the
aircraft is powered on, the system will conduct self-checking. After the self-checking is
completed, it will sound a confirmation tone.
2. Novice user should fly in GPS mode.
3. If the aircraft cannot be unlocked due to week GPS signal, switch to ATTI mode to
unlock the aircraft. However, it is not recommended for novice pilots to fly in this mode,
as the location of the drone is not fixed when flying in this mode.
4. In Custom mode, the motors cannot be unlocked in Cruise, Orbit, Headless mode.
Starting (Arming) Motors
Remote controller operation
Description
Pull both the left and right joysticks simultaneously
down and inwards and maintain this position for 3
seconds. The motors will be unlocked and start
rotating.
Stopping Motors (Emergency Stop)
Remote controller operation
Description
Method 1: After the aircraft has landed on the ground
or water surface, pull the throttle to the lowest position,
and hold for 3 seconds. The motor will be lock and stop
rotating.
The recommended method for stopping motors.
Loading ...
Loading ...
Loading ...