Loading ...
Loading ...
Loading ...
©2023 SwellPro All Rights Reserved 26
Follow Me
Start Follow Me: 1) Check that the remote
controller has a GPS signal by checking the
GPS status indicator on the screen.(The GPS
status icon is not flashing) 2) Press and hold
the Follow Me button ① to start Follow Me
mode. The remote controller will beep twice.
Stop Follow Me: Press and hold the "FOLLOW
ME" button again until the remote controller
beep once to indicate that Follow Me mode is
disengaged.
Return to Home (RTH)
Long press the Return Home button ②, the
remote controller will beep and vibrate twice
to indicate that the drone will initiate the
return to home process. The flight mode
indicator on the remote controller status bar
will change to the letter "R" to indicate the
drone is on the RTH process.
⚠ If aircraft set to return to remote controller,
ensure remote controller has good GPS signal
during the entire RTH process. (The GPS
status icon is not flashing)
Smooth+ Controls
The patented "Smooth+" flight control allows the pilot to finely tune the Roll and Yaw of
SplashDrone 4. Smooth+ makes professional, steady flight control as easy as turning
the knobs.
Loading ...
Loading ...
Loading ...