Loading ...
Loading ...
Loading ...
14 15
TROUBLESHOOTING
1）Do not make ice
Problem Inspection Project Possible Reasons Solution
Press "open key".In the closed
position
Power switch
Plug in a socketNo connection socketPower cord
Check and replaceFusing or damagingControl panel fuse
Remove the ice or
remove the ice from
the evaporator.
Ice full ice blocks the
evaporator swing
blade.
Replace proximity
switch
If there is no such
case, proximity
switch fault.
Storage of
refrigerators
Contact the power
supply department
No electricity or
voltage is too low.
Power supply
Increase water
pressure
No water or low
water pressure.
Water supply faucet
Clean filter screen
or follow change
valve.
Filter clogged or inlet
valve bad.
Inlet valve
Contact the power
supply department
Low voltagePower supply
At least 6FT
distance between
left and right sides.
Air intake is blocked.Air inlet
Cleaning condenserOverabundance of
ash
condenser
Contact after-sales
service personnel
Leakage of
refrigeration system
refrigeration system
Contact after-sales
service personnel
The connecting line
is broken or
dropped.
Compressor
The ice
maker is
not running
The
compressor
doesn't
work or
stop
suddenly
TROUBLESHOOTING
1）Do not make ice
Problem Inspection Project Possible Reasons Solution
Replacement of
inlet valve
Internal leakage of
inlet valve
Inlet valve
Contact
after-sales
service personnel
Water level detection
insensitive
Water level sensor
replaceRupture leads to
water leakage.
Intake pipe or drain
pipe
Tighten or
re-install
Loosening or
installation is not in
place.
Water intake
Long press the
“ICE DEICING”
button when the
machine is
running
long time to make
ice or deicing ice
abnormality
Evaporator
Water keeps
on adding
water
Water
leakage
Ice cannot
be removed
from
Evaporator
Loading ...
Loading ...
Loading ...