Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
4. Insert blade arm (S) through slot in the side of the
motor assembly (H). Align the holes of one blade arm
(S) with two motor screw holes in underside of the
motor assembly (H). Secure with two motor screws
(XX). Repeat this step for the remaining blade arms
(S).
Hardware Used
XX
Motor Screw x 12
5. Remove one and loosen the other three tter plate
screws (L) but do not remove from tter plate (K).
Feed the single-pin connector through center hole
in light pan (M). Align the three keyhole slots in the
light pan (M) with the loosened tter plate screws (L).
Place the light pan (M) over the three screws and turn
the light pan (M) clockwise. Then tighten the three
tter plate screws (L). Re-install the tter plate screw
(L) that was removed in the previous step and tighten
rmly.
6. Remove one and loosen the other two light pan
screws (N) from the underside of the light pan (M).
Connect the Single-pin connector from the tter plate
(K) to the Single-pin connector from the light kit (O).
Align the keyhole slots in the light kit (O) with the
loosened screws in the light pan (M). Turn light kit (O)
clockwise and replace the previously removed light
pan screw (N). Tighten all screws.
4
H
O
N
M
L
M
K
S
XX
5
6
Single-pin
Connector
Single-pin
Connector
Keyhole
Slot
Keyhole
Slot
Loading ...
Loading ...
Loading ...