Loading ...
Loading ...
Loading ...
English 35
Setting up
Refrigerator
Household water line
Copper tubing
(Not supplied)
Plastic tubing
(B)
(Not supplied)
or
Bulb
Compression nut (B) (1/4”)
(6.35 mm) (Not supplied)
Férula
(no provista)
Plastic Tubing
(Supplied)
Compression
Nut (1/4”)
(6.35 mm)
(Assembled)
Compression
Fitting
(Assembled)
1. Connect the household water line to the
assembled compression tting.
- If you are using copper tubing, slip the
compression nut (B) (not supplied) and
ferrule (not supplied) on the copper
tubing (not supplied) as shown.
- If you are using plastic tubing (B), insert
the molded end (Bulb) of the plastic
tubing (B) into the compression tting.
CAUTION
• Do not use plastic tubing (B) without the
molded end (Bulb).
2. Tighten the compression nut (B) onto
the compression tting.
Do not over-tighten the compression
nut (B).
3. Turn the water on and check for any
leaks inside the refrigerator, around
the water lter, and in any connection
areas. If you nd water drops or leaks,
turn off the main water supply.
If the leaks are in the connection areas,
check the connections and, if necessary,
tighten. If there are leaks in the
refrigerator, check the water lter and
conrm it is in the locked position.
Turn on the water supply and check for
leaks again.
4. Plug in the refrigerator.
Loading ...
Loading ...
Loading ...