Loading ...
Loading ...
Loading ...
11
ENGLISH
Belt Hook (Fig. A)
The cordless nailers include an integrated belt hook and can
be attached to either side of the tool to accommodate left‑ or
right‑handedusers.
If the hook is not desired at all, it can be removed from thetool.
To Remove Belt Hook
1. Remove battery pack fromtool.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can causeinjury.
WARNING: Use only DEWALT battery packs andchargers.
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Trigger
2
Trigger lock‑off
3
Depth adjustment wheel
4
Headlights/low battery/
stallindicator
5
Jam clearing latch
6
Contact trip
7
Sliding magazine
8
Bump/sequential
selectorswitch
9
Reversible belt hook
10
No‑mar pad
11
No‑mar pad storage
12
Stall release lever
13
Nail depth indicator
14
Battery pack
15
Battery release button
16
Pusher assembly
17
Belt hook screw
Intended Use
Your cordless finish nailer has been designed for driving nails
into woodenworkpieces.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
Your cordless finish nailer is a professional powertool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
Date Code Position (Fig.B)
The date code
13
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2020XX XX
Year and week of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Length ofnails.
Shankdiameter.
Nailgauge.
Magazinecapacity.
No additionallubrication.
Toolvoltage.
Magazine angle: 0˚.
Package Contents
The package contains:
1 Nailer
3 Non‑mar tips
1 Charger
1 Li‑Ion battery pack (C1, D1, G1, L1, M1, P1, S1, T1, X1, Y1
models)
2 Li‑Ion battery packs (C2, D2, G2, L2, M2, P2, S2, T2, X2, Y2
models)
3 Li‑Ion battery packs (C3, D3, G3, L3, M3, P3, S3, T3, X3, Y3
models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
NOTE: N and NT versions are not supplied with batteries or
acharger.
Battery Type
The following tools operate on a 18 volt battery pack: DCN662
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCB546, DCB547, DCB548. Refer to Technical
Data for moreinformation.
Loading ...
Loading ...
Loading ...