Loading ...
Loading ...
Loading ...
ENEN
Clearing Home Environment
To improve the working eciency of your robot, put away any
loose cords, rags, slippers, toys, etc.
Open the door of the room to be cleaned, and put the furniture
in its proper place to make more space.
To prevent the robot from not recognizing the area to be
cleaned, do not stand in the front of the robot, threshold, hall
way, or narrow places.
Before cleaning, place a physical barrier at the edge of the
stairs and sofa to ensure safe and smooth operation of the
robot.
1. Remove the protective strips
3. Set up the charging dock
Stick the double-sided tape at the bottom of the charging
dock, then place the dock on the level ground against the wall
and connect it to a power outlet.
2. Install the side brush
Click
4. Place the robot onto the charging dock to charge
Preparation Before Use
Note:
Keep the immediate area 1.5m in front of the charger and 0.5m to both sides of the
charging dock clear of objects.
To ensure you can connect to the robot with your phone well, make sure the robot
and charging dock are within WiFi range.
Do not place the charging dock in an area with direct sunlight or where other
objects might block the signal, as this may hinder the robot from returning to the
charging dock.
Please clean the floor area where the charging dock will be placed with a dry rag.
Use of the double-sided tape is based on your need.
If necessary, remove the double-sided tape slowly to reduce adhesive residue.
Battery Level Indicator
• White: Battery level is more than 15%
• Orange: Battery level is less than 15%
Note: Install the side brush until it clicks into place.
＞1.5m
＞0.5m
＞0.5m
Note:
Loading ...
Loading ...
Loading ...