Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
P.oB,EM
Poor cut - uneven
cutting
,,,,,,,,,,,,,,,,,,,,,,,
Mower blades will
not rotate
Poor grass
discharge
Headlight(s i not
working
(if so equipped)
,, ,,,u,,
il
2
3
4
5
1
2
3
4
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
CAUSE
Worn. bent or loose blade.
Mower deck not level
Buildup of grass, leaves, and
trash under mower.
Bent blade mandrel.
Clogged mower deck vent from
build-up of grass, leaves, and
trash around mandrels,
Obstruction in clutch mechanism.
Worn/damaged mower drive belt,
Frozen idler pulley.
Frozen blade mandrel.
Engine speed too slow,
Travel speed too fast.
Wet grass.
Mower deck not level.
Low/uneven tire air pressure,
Worn, bent or loose blade.
Buildup of grass, leaves and
trash under mower.
Mower drive belt worn,
Blades improperly installed.
Improper blades used,
1
2
3
4
5
1
2
3
4
2
3
4
5
6
7_
8
9
10
Clogged mower deck vent holes
from buildup of grass, leaves, and
trash around mandrels,
,, ,,,,,,.... ,,,.......
Light switch is "OFF", 1
Bulb(s) or tamp(s) burned out. 2
Faulty light switch, 3
Loose or damaged wiring. 4
Blown fuse. 5
11
CORRECTION
RePlace blade, Tighien blade boit£
Level mower deck.
Clean underside of mower
housing.
Contact a Sears or other
qualified service center.
CEean around mandrels to
open vent holes,
Remove obstruction,
Replace mower drive belt.
Replace idler pulley,
Contact a Sears or other
qualified service center,
Place throttle control in "FAST"
position.
Shift to slower speed.
Allow grass to dry before mowing
Level mower deck.
Check tires for proper PSI.
Replace/sharpen blade. Tighten
blade bolt.
Clean underside of mower
housing.
Replace mower drive belt,
Reinstall blades sharp edge down
Replace with blades listed in
this manual.
Ctean around mandrels to
open vent holes.
Turn light switch "ON",
Replace bulb(s) or lamp(s).
Check!replace light switch,
Check wiring and connections.
Replace fuse.
3O
Loading ...
Loading ...
Loading ...