Tripp Lite B162-001-POE Owner's Manual

Loading ...

11. CLI Commands

11.4.5 Displaying Port-Switching Alerts

Use this command to display an alert message in the command line interface whenever a port is switched via the DVOE Manager,

the B162 device push buttons or the IR remote control. To enable or disable this function, type the command in this format:

echo + on | off + \R\N

Control Description

on Sends an alert in the command prompt window to inform port switching

conﬁguration. For example, when the user assigns the B162-001-POE with

the device ID of 2 to the B162-100-POE with the device ID of 3, the system

sends this message in the command prompt window: sw o2 i3 on

off Disables the alert for port switching.

\r\n Ends the command.

11.4.6 Looking Up System Settings

You can look up the following system settings using the list command:

• Video Wall IDs

• Device ID, MAC address, IP address, ﬁrmware version and device name of B162 transmitters and receivers

To look up system settings, type the command in this format: list + rx | tx | device | videowall + \r\n

Control Description

rx Lists the system information of all B162-100-POE receivers in the environment,

including the device IDs, MAC addresses, IP addresses, ﬁrmware versions and

device names.

tx Lists the system information of all B162-001-POE transmitters in the

environment, including the device IDs, MAC addresses, IP addresses, ﬁrmware

versions and device names.

device Lists the system information of all B162 transmitters and receivers in the

environment, including the device IDs, MAC addresses, IP addresses, ﬁrmware

versions and device names.

videowall Lists the video wall settings.

\r\n Ends the command.

Loading ...

Tripp Lite B162-001-POE HDMI over IP Encoder