Loading ...
Loading ...
Loading ...
9
Questions? We’re here to help!
Visit: shopelitegourmet.com for support on this product.
CLEANING & MAINTENANCE
FILTERING AND STORING THE OIL
• You may store the oil in the fryer, or in a separate airtight
container.
• Crumbs that break away from foods tend to burn and alter
the quality of the oil more rapidly. Over time, this increas-
es the risk of catching re. For this reason, lter the oil
regularly.
• To be sure to get good oil after ltering, it is recommended
not to lter all the oil contained in the bowl, but to throw
away all the crumbs that have stagnate at the bottom of
the bowl. Leave the fryer with the oil in the bowl to cool
completely before ltering the oil (2 hours).
CHANGING THE OIL
• Do not pour used oil into the sink. Allow it to cool, and
throw it away with household waste according to the local
community regulations.
HOW TO CLEAN
1. Always unplug your fryer and leave it to cool completely
before cleaning it (approx. 2 hours).
2. Remove the wire basket.
3. Put the basket and basket handle in the dishwasher top
rack or wash them with a sponge, warm water and a little
dishwashing liquid.
4. Wipe the lid with a sponge soaked in warm water and a
little dishwashing liquid. We recommend cleaning the
viewing window after each use by wiping it with a sponge
and fresh lemon juice. Allow the window to dry at room
temperature or dry with a clean cotton cloth.
5. Dry all items carefully before replacing them.
6. If you do not keep the oil in your fryer, you can store the
basket and the basket handle inside the fryer.
CAUTION:
Before cleaning the
deep fryer, make sure
that it is disconnected
from the power outlet,
make sure the unit
and the oil have
completely cooled.
Oil retains its
temperature for a long
period after use. Do
not attempt to carry
or move the deep
fryer while the oil is
hot.
NOTE:
Filters can be gently
rinsed in warm soapy
water as well and
reused again. But it
will need to be
replaced after
considerable use.
NEVER immerse the
main body into water
to clean.
-
-
HOW TO REPLACE THE FILTERS:
Your carbon lter (black piece) should be changed every 6
months. The oil lter (white piece) should be changed every 12
months.
1. Unclip and remove the lter cover.
2. Take out both white and black lter pieces.
3. Throw out old lters and replace with new lters. Make
sure the White lter piece rests on the metal surface
BELOW the carbon lter (black piece).
9
Loading ...
Loading ...
Loading ...