Loading ...
Loading ...
Loading ...
ENGLISH 17
3
Press the start/pause button
to start processing, and
the processing time starts to count down.
Note:
• By default, the program is set as automatic. If this is not the
case, press the program button
to re-select.
4
After the kneading starts, slowly pour in the water or
water + egg mixture along the entire length of the slot
in the lid.
Note:
• During dough mixing, do not add other ingredients after you
have poured in the water. Otherwise, it will affect the results
of the noodle texture.
5
The pasta will start extruding out after a few minutes.
Place a container right under the outlet. Cut the pasta
into the desired length with the supplied cleaning tool.
Note:
• If you notice the program is not set as automatic while
pasta is extruding, press the start/pause button
to stop
the program. Then, press the power on/off button and
disconnect the plug from the power socket. After cleaning
the shaping discs, you can restart the process.
• If the ratio of liquid and our is not correct, the extrusion
will not succeed. In this case, prepare the ingredients again.
• Move the cleaning tool downwards to cut the pasta.
6
After the pasta making is complete, if you notice there is some leftover dough inside the
chamber, you can press the extrusion-only button
and press the start/pause button
for extra extrusion.
Note:
• The countdown timer of the extrusion-only program is 3 minutes.
• You may nd some ne pasta threads on the pasta surface. This is normal.
• The cooking time of the pasta varies depending on personal preferences, pasta shapes, and
number of servings.
Loading ...
Loading ...
Loading ...