Dji RC MOTION 2 User Manual

Loading ...

DJI RC Motion 2 User Manual

5V, 2A

If the battery level is low, it is recommended to use a charger that supports 5 V, 2 A output

to charge the device.

• Make sure that the default output voltage of the charger is 5 V. Excessive voltage

will damage the device.

The table below shows the battery level LED statuses during charging.

LEDs Battery Level

1%-50%

51%-75%

76%-99%

100%

Linking

Preparation before linking:

1. Power on the aircraft, goggles, and motion controller.

2. Open the goggles menu. Select

Status

and make sure that the aircraft model displayed

at the top of the menu is correct. Otherwise, select

Switch

from the upper right corner

of the menu and then select the correct aircraft.

3. Make sure the aircraft is linked with the goggles.

Link the aircraft with the motion controller:

Loading ...

Dji RC MOTION 2