Dji RC MOTION 2 User Manual

Loading ...

DJI RC Motion 2 User Manual

Controlling the camera tilt: before takeoff or during RTH and landing, press and hold the

dial from the FPV view and then scroll up or down to tilt the camera. Release the dial to

stop the camera tilt.

Adjusting the zoom in Explore Mode: if the aircraft supports Explore Mode and Explore

Mode is turned on, scroll the dial on the goggles FPV view to adjust the camera zoom.

Shutter/Record Button

Press and hold to switch between the photo and video modes. Press once to take a photo

or to start or stop recording.

Controlling the Aircraft

• To ensure flight safety when controlling the aircraft with the motion controller,

press the lock button once to make the aircraft brake and hover before operating

the goggles. Failure to do so is a safety risk and may lead to the aircraft losing

control.

Mode Button

The motion controller has two modes: Normal mode and Sport mode. Normal mode is

selected by default. Press the mode button to switch between Normal and Sport mode.

Press and hold to initiate RTH. Press again to cancel RTH.

Lock Button

Use the lock button to control the takeoff, landing, and brake of the aircraft:

Start/stop motors: press the lock button twice to start or stop the aircraft motors.

Takeoff: press twice to start the aircraft motors, then press and hold to make the aircraft

take off. The aircraft will ascend to approximately 1.2 m and hover.

Landing: press and hold the lock button while the aircraft is hovering to land and stop the

motors automatically.

Brake: during flight, press once to brake the aircraft and make it hover in place with the

Lock Button

Joystick

Mode Button

Accelerator

Loading ...

Dji RC MOTION 2