Loading ...
Loading ...
Loading ...
9
5. After programming the appliance as described above,
press the AUTO button to prepare the coee at the required
time (the AUTO light comes on).
Please note:
• To change the auto-start time, press the AUTO button for
about 2 seconds, then set the new time as described in
point 2.
• Important: at the set time, the appliance starts making the
drip coee. The espresso coee section does not come on.
5.3 Keep-warm function
After delivering the drip coee, the warming plate stays on for a
certain length of time to keep the coee in the jug hot. The ap-
pliance then switches o automatically (the ON light goes o).
The keep-warm time can be varied as follows:
1. Press the ON/OFF button (g. 5) for about 2 seconds until
0:30 ashes on the display.
2. Change the period of time by pressing the HOUR (and MIN)
button repeatedly.
3. Wait 5 seconds. When the display stops ashing, the time
is set.
Please note:
If the time set is 0:00, the appliance goes o (the period of time
can be set from 1 minute to 11 hours and 59 minutes).
5.4 “1-4” cups button
If you want to make just a few cups, after pressing the "ON/
OFF" button, press the "1-4" button to improve the avour. This
feature activates a unique brewing process, releasing water into
the lter slowly, wetting the ground coee gradually for a better
avour and aroma.
To enable the function, press the "1-4" button (g. 6). The light
on the button comes on.
To disable the function, press the button again.
Do not use this function when making a whole jug of coee.
The function can also be used in AUTO mode.
5.5 How to make drip coee
• Open the lter holder by rotating it towards the right (g.
7).
• Fill the jug with fresh clean water up to the level indicated
for the number of cups of coee you want to make, taking
care not to exceed the MAX level (g. 8).
• Then pour the water into the coee maker tank
(g. 9).
• Insert the permanent lter in the lter holder (g. 10).
• Place the ground coee in the lter using the measure pro-
vided and distribute evenly (g. 11). As a general rule, use
one level measure of coee (about 7 grams) for each cup
you want to make (for example, 10 measures for 10 cups).
• Close the lter holder, close the jug with the lid and place it
on the warming plate.
• Press the ON/OFF button. The light on the button indicates
that the coee maker is operating.
• After a few moments, the coee starts percolating.
It is normal for the appliance to give o steam during operation.
Once brewed, to keep the coee warm, place the jug on the
warming plate and leave the appliance turned on (with the light
on the "ON/OFF" button on). The coee in the jug will be kept at
the right temperature.
• To turn the appliance o, press the ON/OFF button.
6. MAKING ESPRESSO COFFEE
6.1 Preheating the coee unit
To obtain espresso coee at the right temperature, the coee
machine must be preheated:
1. Press the ON/OFF button (g. 12) to turn the appliance on.
The light comes on.
2. Place the lter in the lter holder (g. 13). Make sure the
projection on the lter is inserted correctly in the corre-
sponding slot. Attach the lter holder with lter to the
appliance (g. 14) without adding coee. Use the smaller
lter to make one coee or the larger lter to make two
coees.
3. Place a cup under the lter holder. Use the same cup as will
be used to prepare the coee in order to preheat it.
4. Wait for the light to come on, then immediately
turn the selector dial to the position (g. 15). Deliver
water until the light goes o, then stop delivery by press-
ing the same button and empty the cup.
(It is normal for a small and harmless pu of steam to be given
o when removing the lter holder).
6.2 How to make espresso coee using ground
coee
1. After preheating the appliance as described in the previous
paragraph, use the smaller lter to make one coee or the
larger lter to make two coees.
2. To make just one coee, place one level measure of ground
coee (about 7 g) in the lter. (g. 16). To make two cof-
fees, place two loosely lled measures (about 6+6 g) of
ground coee in the lter. Fill the lter a little at a time to
prevent the ground coee from overowing.
Important:
to ensure correct operation, before placing the ground coee in
the lter holder, clean the lter of ground coee residues left
from the previous brewing.
3. Distribute the ground coee evenly and press lightly with
the presser (g. 17).
Loading ...
Loading ...
Loading ...