Hikvision DS-2CD2D25G1-D/NF 3.7MM User Manual

Loading ...

Figure 6-5 Set Rule

Oponal: You can set the parameters of mulple areas by repeang the above steps.

For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,

refer to Linkage Method Sengs .

Click Save.

6.2.6 Set Region Entrance Detecon

It is used to detect objects entering a pre-dened virtual region from the outside place. If it occurs,

the device can take linkage acons.

Steps

Go to Conguraon → Event → Smart Event → Region Entrance Detecon .

Check Enable.

Select one Region. For the region sengs, refer to

Draw Area .

Set sensivity.

Sensivity It stands for the percentage of the body part of an acceptable target that goes

across the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands for the

target body part that goes across the pre-dened region. ST stands for the

complete target body. The higher the value of sensivity is, the more easily the

alarm can be triggered.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2D25G1-D/NF 3.7MM 2MP Network Covert Camera 3.7mm Lens