Loading ...
Loading ...
Loading ...
-
11
Turn the programme selector switch to
position C (drive).
Roughly position the appliance.
Note
The waste container can only be emptied in
two-hand operation. For this purpose, push
the two-hand operation button on the bon-
net together with the corresponding direc-
tion keys 1 to 4 on the control panel.
Raise waste container: Push the two-
hand operation button and direction key
1.
Slowly drive towards the collection con-
tainer.
Lock parking brake.
Tipping the waste container outwards:
Push the two-hand operation button
and direction key 2.
Completely tip the waste container in-
wards: Push the two-hand operation
button and direction key 3.
Release parking brake.
Drive away the collection container
slowly.
Lower the waste container to the end-
position: Push the two-hand operation
button and direction key 4.
Note: The waste container can only be
completely lowered after it has been
tipped inwards into its initial position.
Note: After switching off the appliance, the
dust filter is automatically dedusted.
Park the sweeper on an even surface.
Turn the program selection switch to
"OFF".
Activate parking brake.
Remove the key.
Open the engine hood.
Close the fuel supply.
Figure: Close fuel cock (petrol engine)
Figure: Close fuel cock (diesel engine)
Close engine bonnet.
� DANGER
Risk of accident!
When loading the appliance the free-
wheel lever must be closed. Only then
the travel drive and parking brake are
ready for operation. The appliance
must always be moved up or down
slopes by engaging self-propulsion.
Risk of personal injury or damage!
Observe the net weight (transport
weight) of the device during transport
on trailers or vehicles.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Petrol engine/diesel engine: Close
fuel cock.
Secure the wheels of the machine with
wheel chocks.
Secure the machine with tensioning
straps or cables.
Note: Observe markings for fixing
points on the base frame (chain sym-
bols). Only unload the appliance on lev-
el grounds.
Remove KIK-key.
Disconnect the battery of the sweeper
during transport.
Park the sweeper on a level surface in
a dry, frost protected area. Protect it
against dust by means of covering ma-
terial.
Turn the program selection switch to
"OFF".
Remove KIK-key.
Lock the sweeper to ensure that it does
not roll off.
Additionally observe the following points if
the sweeper is not used over a longer peri-
od of time:
Change engine oil.
Diesel engine: Either completely drain
the fuel tank or completely fill it with fu-
el.
Close fuel cock.
Let the engine turn without starting it
every 6 months.
Petrol engine: Close the fuel cock, re-
move the fuel hose from the fuel cock.
Open the fuel cock and completely
drain the fuel into a suitable container.
Then attach the fuel hose and close the
fuel cock.
Unscrew the spark plug and put 5 ml of
engine oil in the spark plug bore. Rotate
the engine several times without the
spark plug (do not start). Screw in the
spark plug.
Clean the inside and outside of the
sweeper.
Park the machine in a safe and dry
place.
Turn the program selection switch to
"OFF".
Remove KIK-key.
Set the main switch to the "0" position.
Activate parking brake.
Disconnect the negative terminal of the
battery if the appliances is not used for
more than 4 weeks.
Figure is symbolic
Charge battery approx. every 2 months.
– Maintenance work may only be carried
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety regula-
tions.
– Mobile appliances used for commercial
purposes are subject to safety inspec-
tions according to VDE 0701.
– Use only roller brushes/ side-brushes
that are provided with the appliance or
specified in the Operations Manual.
The use of other roller brushes/ side-
brushes can affect the safety of the ap-
pliance.
– The battery installed in the appliance is
maintenance-free.
� DANGER
Risk of personal injury or damage!
First switch off the device and remove
the KIK-key (Kärcher Intelligent Key)
before performing any cleaning or
maintenance tasks on the device, re-
placing parts or switching over to anoth-
er function.
Turn off the appliance
Close fuel cock
Transport
Storage/decommissioning
Care and maintenance
General notes
38 EN
Loading ...
Loading ...
Loading ...