Loading ...
Loading ...
Loading ...
9
Panel Descriptions
Connecting a Footswitch
Connecting a footswitch (sold separately: BOSS FS-6, FS-7, or FS-5L)
Stereo 1/4” phone type
,
Stereo 1/4” phone type
or
FS-5L
RING
RING
TIP
TIP
RING TIP
FS-6 FS-7
Rear panel
Stereo 1/4” phone type
,
1/4” phone type x 2
or
Switch Explanation
TIP Switches between CH1 and CH2.
RING Switches between BANK A and BANK B.
* The KATANA MkII is compatible with latch-type footswitches (FS-6, FS-
7, FS-5L). If you’re using an FS-6 or FS-7, set the mode of A and B to FS-
5L (LATCH). Momentary-type footswitches (e.g., FS-5U) cannot be used.
Connecting the GA-FC/GA-FC EX
50 EX, 100, 100/212, HEAD, Artist, Artist HEAD only
Connect a stereo cable to the GA-FC jack.
* Always use a stereo cable.
* Use cables that do not contain resistors.
GA-FC
Using the GA-FC/GA-FC EX
You can switch TONE SELECT (CH1–CH4, PANEL). You can also switch
EFFECTS (BOOSTER, MOD, FX, DELAY, REVERB) on/o.
Artist, Artist HEAD
You can long-press the selected [CH1]–[CH4] or [PANEL] switch to switch
solo on/o (the indicator slowly blinks green when solo is on).
If you long-press the [EFFECTS] switch (the indicator blinks), you can
then use the [DELAY] switch to tap-input the delay 1 time, and use the
[REVERB] switch to tap-input the delay 2 time.
Using the expression pedals
If you connect an expression pedal (sold separately: Roland EV-5, BOSS
EV-30, FV-500L, FV-500H), you can use the pedal to vary the volume or
control an eect such as WAH.
GA-FC
Expression Pedal
Jack Explanation
VOLUME Adjusts the volume.
EXP You can control an eect such as WAH.
* You can use dedicated software (p. 11) to assign a function of your
choice to an expression pedal connected to the VOLUME or EXP jack.
Setting MINIMUM VOLUME of an expression pedal
With the [MINIMUM VOLUME] knob of an
expression pedal, you can set the value
for when the pedal is lifted up all the way
(lowest value).
* Use only the specied expression pedal. By connecting any other
expression pedals, you risk causing malfunction and/or damage to the
unit.
Using the footswitches
If a footswitch (sold separately: FS-6, FS-7, or FS-5U) is connected, you can
use it to switch between the TONE SETTING’s BANK A/B, or to set the delay
time (TAP).
1/4” phone type ,1/4” phone type
Jack Explanation
FS1 Switches the TONE SETTING’s BANK A/B.
FS2
Sets the delay time. When you press this button two or more
times, the delay time is set to the interval between presses.
* You can use dedicated software (p. 11) to assign a function of your
choice to a footswitch connected to the FS1 or FS2 jack.
Using the GA-FC/GA-FC EX to switch the BANK
With one of the channels [CH1]–[CH4] selected, hold down the [PANEL]
switch for approximately one second.
The selected [CH1]–[CH4] switch blinks, and the bank switches between
BANK A and BANK B. When BANK B is selected, the [PANEL] button blinks
slowly.
GA-FC
* You can’t switch banks while PANEL is selected.
[MINIMUM
VOLUME] knob
Loading ...
Loading ...
Loading ...