Loading ...
Loading ...
Loading ...
8
Panel Descriptions
24 [EXPAND] switch
Artist, Artist HEAD only
You can connect two KATANA MkII units and use them for stereo
output or as dual amps.
Switch Explanation
OFF Use one KATANA MkII unit by itself.
STEREO
Connect two KATANA MkII units for stereo output.
For details on connections, refer to “Stereo connection method”
(p. 6).
DUAL LINK Connect two KATANA MkII units and use them as dual amps.
Dual amp connections
Amp 1
Amp 2
1. From the POWER AMP IN jack of the amp 1 to which your
guitar is connected, connect to the INPUT jack of the amp 2.
2. Set both amp’s [EXPAND] switch to “STEREO” or “DUAL
LINK”.
GA-FC/GA-FC EX connection
If you connect the GA-FC/GA-FC EX when using a dual amp setup,
you can control the two units simultaneously.
GA-FC
Amp 1
Amp 2
25 AIR FEEL
Artist HEAD only
[TYPE] switch
Switch Explanation
REC A distantly-miked sound for recording.
LIVE A close-miked sound for live.
BLEND
A sound providing a good blend of closed-miked and
distantlymiked sound that can be broadly used for live or recording.
[CUSTOM SETTING] switch
Switch Explanation
OFF Enables the function you set using the [TYPE] switch.
M1
Select either the M1 or M2 that you congured on the dedicated
software (p. 11) to use.
M2
About the STEREO EXPAND mode
on the KATANA-50 MkII EX
You can connect two KATANA-50 MkII EX units for stereo output
(STEREO EXPAND mode).
1. While holding down the [CH2] and [PANEL] buttons,
turn on both amp 1 and 2.
Stereo connection method
Amp 1
Amp 2
1. From the LINE OUT jack of the amp 1 to which your
guitar is connected, connect to the POWER AMP IN
jack of the amp 2.
* You can use a KATANA-50 MkII (Ver. 2.0 or later) for amp 2.
* Amp 2 operations
When using STEREO EXPAND mode, the [PANEL] button lights
up red, and you can only operate the [MASTER] knob and the
[POWER CONTROL] switch.
* To return to normal LINE output, turn o the power, and then
turn it on again while pressing the [CH2] and [PANEL] buttons.
Loading ...
Loading ...
Loading ...