Loading ...
Loading ...
Loading ...
5
Panel Descriptions
5 [PRESENCE] knob
100, 100/212, HEAD, Artist, Artist HEAD only
Adds lustrous outline to the mid- and high-frequency range. This is
eective when you want to improve the denition of the sound.
6 [MASTER] knob
Adjusts the overall volume.
7 [POWER CONTROL] switch
Lets you switch the output level of the power amp according to
your location or needs. By selecting “STANDBY” you can mute the
sound while leaving the unit powered-on.
This lets you mute the amp without changing the volume or other
settings when you leave the stage, such as between sets of your live
performance.
8 TONE SETTING
Here you can store or recall sounds that you’ve set up on the panel.
50, 50 EX
You can store a total of four sounds.
BANK A CH1, CH2
BANK B CH1, CH2
* With the KATANA-50 MkII EX, you can use CH3 and CH4 by
connecting a GA-FC/GA-FC EX (sold separately).
100, 100/212, HEAD, Artist, Artist HEAD
You can store a total of eight sounds.
BANK A CH1, CH2, CH3, CH4
BANK B CH1, CH2, CH3, CH4
MEMO
To switch between BANK A and BANK B, hold down the [PANEL]
button for approximately one second when any one of the [CH1]–
[CH4] buttons are selected.
The selected [CH1]–[CH4] button blinks, and the bank switches
between BANK A and BANK B. When BANK B is selected, the [PANEL]
button blinks slowly.
* You can’t switch banks while PANEL is selected.
[BANK] button
Artist, Artist HEAD only
Switches between BANK A and BANK B.
When BANK B is selected, the [BANK] button is lit.
[CH1]–[CH4] buttons
The [CH1]–[CH4] buttons (
50, 50 EX
[CH1] [CH2] buttons) on
the remember the settings of all top panel knobs (except for the
[MASTER] knob) and buttons.
When you press and hold a button for one second, the panel
settings are stored.
* You can make the settings back to the factory state by turning the
power on while holding down the [PANEL] button.
[PANEL] button
Makes the unit sound using the current settings of the panel knobs.
9 [CAB RESONANCE] switch
100/212, HEAD, Artist, Artist HEAD only
Modies the resonance of the speaker cabinet.
Value Explanation
VINTAGE The warm and sweet sound of a vintage cabinet.
MODERN A modern cabinet sound notable for a tight low-end.
DEEP Sound with powerful low-end as well as a distinctive edge.
10 [POWER] switch
Turns the power on/o.
11 SOLO
Artist, Artist HEAD only
[SOLO] knob
Adjusts the volume when solo is on.
[SOLO] button
Turns solo on/o.
12 TONE SHAPE
Artist, Artist HEAD only
[GLOBAL EQ] button
Turns the global equalizer on/o.
You can also switch between three types of equalizer settings
(green, red, orange).
MEMO
The three types of global equalizer settings can be edited using
dedicated software (p. 11).
These settings cannot be edited from the unit itself.
[CONTOUR] switch
Switches the contour characteristics of the sound.
In addition to “OFF”, you can choose from the three types “1, 2, 3”.
50, 50 EX, 100, 100/212, HEAD only
Loading ...
Loading ...
Loading ...