Loading ...
Loading ...
Loading ...
Operator's Manual
Compact Tiller and Cultivator
Check for parts online at www.brutepower.com or call 800-743-4115 M-F 8-5 CST
19
7. Recheck belt tension and adjust if necessary
8. Attach spark plug wire.
SPARK PLUG
SPARK PLUG
CAP/WIRE
FIGURE 8
COVER
BOLT
PULLEY BOX
COVER
BEEHIVE
SPRING
DRIVE SAFETY
CONTROL LEVER
DISENGAGED
FORWARD
CABLE
DRIVE BELT
(P/N 20343)
1/8” - 1/4”
STRETCH
FIGURE 9
WARNING
TO PREVENT ACCIDENTAL
STARTING:
ENGINE MUST BE TURNED OFF
AND COOL, AND SPARK PLUG
CAP/WIRE MUST BE REMOVED
AND SECURED FROM SPARK
PLUG BEFORE CHECKING
AND ADJUSTING ENGINE OR EQUIPMENT.
NOTICE
CHECK FORWARD BELT TENSION REGULARLY.
TOO MUCH OR TOOL LITTLE TENSION WILL CAUSE
PREMATURE BELT FAILURE.
DO NOT USE CHOKE CONTROL TO STOP ENGINE.
BACKFIRE OR ENGINE DAMAGE MAY OCCUR!
TO STOP THE ENGINE AT ANY TIME, MOVE
THROTTLE CONTROL TO THE OF OR STOP
POSITION, OR SET THE ON/OFF SWITCH TO OFF.
NEVER RUN ENGINE WITHOUT COMPLETE AIR
CLEANER INSTALLED ON ENGINE. ENGINE CAN
OVERHEAT AND BECOME DAMAGED IF DEBRIS
BLOCKS THE COOLING SYSTEM OR ROTATING
SCREEN.
DANGER
DO NOT STORE TILLER IN AN UNVENTILATED
AREA WHERE FUEL FUMES MAY REACH FLAME,
SPARKS, PILOT LIGHTS, OR AN IGNITED OBJECT.
DRAIN FUEL OUTDOORS AWAY FROM ANY
IGNITION SOURCES. USE ONLY APPROVED FUEL
CONTAINERS.
ENGINE AND SURROUNDING PARTS BECOME
EXTREMELY HOT DURING NORMAL OPERATION.
TEMPERATURE OF MUFFLER AND NEARBY AREAS
MAY EXCEED 150°F 66°C. AVOID THESE AREAS.
ALLOW ENGINE TO COOL COMPLETELY BEFORE
TOUCHING THESE HOT SURFACES. THESE AREAS
WILL CAUSE SERIOUS BURN INJURIES IF TOUCHED
BEFORE THE ENGINE HAS COOLED.
ALWAYS KEEP HANDS AND FEET CLEAR OF
ROTATING MACHINE PARTS.
Not for Reproduction
Loading ...
Loading ...
Loading ...