Loading ...
Loading ...
Loading ...
22 OPERATION
Time and Status Display
a Estimated Time Remaining
• When a cycle is selected, the default time for that cycle is displayed. This time will change as options
are selected.
• If the display shows ---, then the time will be displayed after the load sensing has detected the load
size.
• The time shown is only an estimate. This time is based on normal operating conditions. Several
external factors (load size, room temperature, incoming water temperature, etc.) can affect the actual
time.
b Cycle Status Indicators
• These LEDs will blink when a cycle is selected to indicate which stages will run.
• When a cycle is running, the LED for the active stage will blink, and the LEDs for the remaining stages
will remain steady. Once a stage is complete, the LED will turn off. If a cycle is paused, the active stage
LED will stop blinking.
c Drawer Lock Indicator
• This indicator lights up when the cycle starts and the drawer is locked.
• The indicator light stays on until the cycle is paused, stopped or has finished.
d Control Lock Indicator
• This indicator lights up when the control panel is locked.
• [L and the remaining wash time are displayed, in turn, on the time remaining display.
• When this function is set, all controls are disabled except for the Power button.
e Wi-Fi Indicator
• This indicator lights up when the product is connected to a home Wi-Fi network.
f Remote Start Indicator
• This indicator lights up when the Remote Start feature is activated.
Cycle Guide
The wash cycles are designed for specific types of wash loads. Select the cycle that best matches the load
contents for maximum wash performance and fabric care.
Press the cycle selector button to select the desired cycle. When you select a wash cycle, the light for the
corresponding wash cycle will turn on.
NOTE
• Rinse can be selected for every cycle except for Tub Clean in this table.
Loading ...
Loading ...
Loading ...