Tower T838001S Square Sensor Bin with Fingerprint Proof Coated Exterior, Steel

User Manual

For T838001S.

PDF File Manual, 1 pages, Read Online | Download pdf file

T838001S photo
INTRODUCTIONS
1. Open the cover of the battery case at the bottom of the dustbin and equip it with four
batteries "AA" as the mark of positive and negative pole.
2. Place the dust bag (plastic bag) by the center of the press ring. Then install the bottom
tub, press it tight, and then put the upper tub on the bottom tub.
3. Turn on the power switch at the bottom of the dustbin. Then the red indicator light will
be on for 2 seconds. And then it flashes once every 4 seconds which shows that the
electric system works in the normal condition.
4. When throwing rubbish into it, just keep your hand/object about 5-15cm above the
inductive window, the lid will open automatically within 0.5 second, then it will close
automatically in about 5-6 seconds after your hand/object are removed from the sensor
area. Keeping you hand/object within the sensor area which will keep it open.
5. 1) The indicator light flashes red (every 4 seconds)
2) When the lid opens, the indicator light shows green.
3) When the lid closes, the indicator light shows red.
6. The batteries can last about 2- 4 months supposing the dustbin opens and closes 20
times one day.
7. Attention
1. Dont wash the outside dustbin because it is equipped with many electronic units but
you can clean it with a wet rag.
2. Dont press the lid of the dustbin when it is opening.
Dont open the lid by force for it may damage the lid.
3. Take out the exhausted battery in time in case the seeping liquid from them damaging
the electronic units.
4. To avoid the sunlight direct on the inductive window.

Other documents for Tower T838001S

The following documents are available:
User Manual Other Documents Photos

Specifications