Loading ...
Loading ...
Loading ...
Setting the Clock
FEATURE OVERVIEW
• Setting the Clock
• Changing between 12 or
24 hour display
TIMED OVEN
....i
......... _'_,, N_
0N/0FF 0N/OFF FOODCATEGORIES
J
Setting the Clock
The CLOCK _ pad is used to set the clock. The clock may be
v
set for 12 or 24 hour time ofday operation. The clock has been
preset at the factory for the 12 hour operation. When the range is
first plugged in, or when the power supply to the range has been
interrupted, the timer inthe display willflash with "PF" (power
failure, See Fig. 1).
INSTRUCTIONS
To set the clock (example below for 1:30):
1. Press (_). "CLO" will appear in the display (Fig. 2).
2. PressQQQpadstosetthetimeofdayto 1:30
(Fig. 3). "CLO" will appear in the display. Press _.
"CLO" will disappear and the clock will start (Fig. 4).
Changing between 12 or 24 hour time of day display:
1. Press and hold _ for 6 seconds (Fig. 3). While holding the
v
pad down the current time ofday willremain and "CLO" will
disappear from the display (Fig. 4). CONTINUE holdingthe pad
until a beep isheard.
2. The display will show either "12:00" (Fig. 5) or "24:00" (Fig. 6).
3. Press _ to switch between the 12 and 24 hour time of day
display. The display will show either "12:00" (Fig. 5) or "24:00"
(Fig. 6).
4. Press _ to accept the change or press _ to reject the
change.
5. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.
PRESS
QQQ
Q for 6 seconds
O°r
Figure 1
DISPLAY
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Z
15
Loading ...
Loading ...
Loading ...