Loading ...
Loading ...
Loading ...
25
TROUBLE SHOOTING & MAINTENANCE
TROUBLE SHOOTING
PROBLEM: The recumbent bike wobbles when in use.
1)SOLUTION: Turn the Rear Stabilizer End Caps (43) on the Rear Stabilizer (3) or
Adjustable Leveler (45) on the bottom of the rear Main Frame (1) as needed to
level the recumbent bike.
PROBLEM: The display on the Console (14) does not turn on or displays incorrect
information.
1) SOLUTION: Remove the Console (14) and verify that the wires from the console
(10) are properly connected to the wires of the Front Post (8).
2) SOLUTION: Check if the batteries are installed properly or replace dead batteries.
PROBLEM: The recumbent bike makes a squeaking noise when in use.
1) SOLUTION: The bolts may be loose on the recumbent bike. Inspect all of the
bolts and tighten any loose bolts.
MAINTENANCE
Cleaning:
The recumbent bike can be cleaned with a soft clean damp cloth.
Do not use abrasives or solvents on the plastic parts.
Please wipe your perspiration off the recumbent bike after each use.
Be careful not to get excessive moisture on the Console display as this might cause
an electrical hazard or the electronics to fail.
Please keep the recumbent bike, especially the computer console out of direct
sunlight to prevent screen damage.
Please inspect that all assembly bolts, nuts, screws, and pedals on the machine are
thoroughly tightened every week. Tighten any loose parts.
Storage:
Store the recumbent bike in a clean and dry environment away from children.