Loading ...
Loading ...
Loading ...
en Troubleshooting
52
Fault Cause and troubleshooting
Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades
are often more severely affected.
▶ Use rust-resistant tableware.
Cutlery may also rust if washed together with rusting
items.
▶ Do not wash rusting items.
Salt content in washing water is too high.
1. Remove any spilled special salt from the tub.
2. Screw the cap of the special salt dispenser on tight.
Detergent residue is
present in the deter-
gent dispenser or the
tablet collecting tray.
Spray arms were blocked by tableware so detergent
was not rinsed out.
▶ Check that the spray arms are not blocked and can
rotate freely.
Detergent dispenser was damp when detergent was
added.
▶ Only add detergent to a detergent dispenser when
dry.
Excessive formation of
foam occurs.
Hand washing-up liquid is present in dispenser for
rinse aid.
▶ Immediately add rinse aid to the dispenser.
→"Adding rinse aid", Page31
Rinse aid has been spilled.
▶ Remove the rinse aid with a cloth.
Detergent or appliance care product used causes ex-
cessive foaming.
▶ Change the brand of detergent.
Fault Cause and troubleshooting
Special salt refill indic-
ator lights up.
Insufficient special salt.
▶
Add Special salt →Page29.
Sensor does not detect special salt tablets.
▶ Do not use special salt tablets.
Refill indicator for spe-
cial salt does not light
up.
Water softening system is switched off.
▶
Setting water softening system →Page29
Refill indicator for
rinse aid lights up.
Insufficient rinse aid.
1.
Add Rinse aid →Page31.
2. Set the amount of rinse aid to be dispensed.
Loading ...
Loading ...
Loading ...