Loading ...
Loading ...
Loading ...
en Troubleshooting
48
Fault Cause and troubleshooting
Remnants of food on
tableware.
Spray arm nozzles are blocked.
▶
Clean the Spray arms →Page43.
Filters are soiled.
▶ Clean the filters.
→"Cleaning filters", Page42
Filters are inserted incorrectly and/or not engaged.
1. Insert the filters properly.
→"Filter system", Page42
2. Engage the filters.
Washing programme selected too weak.
▶ Select a more intensive washing programme.
▶ Adjust the sensitivity of the sensors.
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
▶ Only remove large remnants of food and do not
prerinse tableware.
Tall narrow receptacles in corner areas are not rinsed
adequately.
▶ Do not position tall narrow receptacles at too great
an angle or in corner areas.
Top baskets on right and left are not set to same
height.
▶ Set the top baskets on the left and right to the
same level.
→"Top basket", Page22
Detergent residue in
the appliance
Lid of the detergent dispenser is blocked by items of
tableware parts and will not open.
1. Arrange tableware in the top basket tableware so
the tab collecting tray is not obstructed by table-
ware.
→"Arrange tableware", Page36
Items of tableware are blocking the dispenser lid.
2. Do not place tableware or fragrance dispensers in
the tablet collecting tray.
The lid of the detergent dispenser is blocked by the
tab and will not open.
▶ Position the tab in the detergent dispenser cross-
wise, not vertically.
Tabs are used in the quick or short programme. Dis-
solving time of the tab is not attained.
Loading ...
Loading ...
Loading ...