Loading ...
Loading ...
Loading ...
17
3. Put the chain drive links (21) into the bar groove (20).
4. Put the chain cutters (22) in the direction of the chain
operation.
5. Put the chain in position and make sure that the loop is
behind the guide bar.
20
21
22
6. Hold the chain and bar.
7. Put the chain loop around the sprocket (18).
8. Make sure the chain tension pin hole (19) on the guide
bar fits correctly with the bolt.
18
19
9. Install the chain cover.
10. Tighten the chain. Refer to Adjust the chain tension.
11. Tighten the chain cover knob when the chain is correctly
tensioned.
NOTE
If you start the chain saw with a new chain, have a test for
2-3 minutes. A new chain gets longer after the first use,
examine the tension and tighten the chain if necessary.
8.4 FIT THE POLE SAW
11
2
13
1. Mount the pole saw head (13) on pole saw handle (2) to
achieve the standard length.
2. Slide the collar (11) upwards.
3. Turn the collar clockwise to tight it.
8.5 FIT THE POLE SAW
1. Mount the pole saw head on pole saw handle to achieve
the standard length.
2. Slide the collar upwards.
3. Turn the collar clockwise to tight it.
8.6 CONNECT THE MACHINE TO
THE POWER SUPPLY
NOTE
The machine has a cord retainer.
8
English
EN
Loading ...
Loading ...
Loading ...