Loading ...
Loading ...
Loading ...
• Maintain Appliance With Care – Keep cutting edge
sharp and clean for best performance and to reduce the
risk of injury. Follow instructions for lubricating and
changing accessories. Inspect appliance cord periodically,
and if damaged, have it repaired by an authorized service
facility. Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean, and free from oil
and grease.
• Check Damaged Parts – Before further use of the
appliance, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition that
may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced by an
authorized service center unless indicated elsewhere in
this manual.
2.2 POLE SAW SAFETY WARNINGS
• Keep all parts of the body away from the saw chain.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material. Saw chain continues
to move after the switch is turned off. A moment of
inattention while operating the pole saw may result in
serious personal injury.
• Carry the pole saw by the handle with the saw chain
stopped. When transporting or storing the pole saw,
always fit the saw chain device cover. Proper handling
of the pole saw will reduce possible personal injury from
the saw chain.
• Hold the pole saw by insulated gripping surfaces only,
because the saw chain may contact hidden wiring or its
own cord. A saw chain contacting a ″live″ wire may
make exposed metal parts of the pole saw ″live″ and
could give the operator an electric shock.
• Keep cable away from cutting area. During operation the
cable may be hidden in shrubs and can be accidentally cut
by the saw chain.
• Do not use the pole saw in bad weather conditions,
especially when there is a risk of lightning. This
decreases the risk of being struck by lightning.
• To reduce the risk of electrocution, never use near any
electrical power lines. Contact with or use near power
lines may cause serious injury or electric shock resulting
in death.
• Always use two hands when operating the pole saw. Hold
the pole saw with both hands to avoid loss of control.
• Always use head protection when operating the pole saw
overhead. Falling debris can result in serious personal
injury.
3 SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this
product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
product better and safer.
Symbol Explanation
Alternating current -Type or charac-
teristic of current.
Precautions that involve your safety.
Read and understand all instructions
before operating the product, and fol-
low all warnings and safety instruc-
tions.
Wear eye and ear protection.
Do not expose the product to rain or
moist conditions.
Wear head protection.
Wear safety footwear.
Wear non-slip, heavy duty gloves.
DANGER! Risk of electrocution!
Keep all bystanders at least 15m away.
Thrown objects can ricochet and result
in personal injury or property damage.
Wear protective clothing and boots.
Remove plug from the mains immedi-
ately if cable is damaged or cut.
Double-insulated construction.
4 RISK LEVELS
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
5
English
EN
Loading ...
Loading ...
Loading ...