Loading ...
Loading ...
Loading ...
Page 10
OPERATION
4. Hold the saw rmly and then pivot the
shoe to the desired angle.
WARNING:
To avoid injury and
damage, do not operate the saw without
the pivot shoe in place. The spindle may
strike against the workpiece and damage
the reciprocating mechanism.
FIG. 3
Shoe Locking Lever
HOOK (FIG. 4)
Your tool is equipped with a convenient
hook for hanging your tool. To use, simply lift
up hook until it snaps into the open position.
When not in use, always lower hook until it
snaps into the closed position.
FIG. 4
Hook
VARIABLE-SPEED TRIGGER
SWITCH (FIG. 5A & 5B)
Your reciprocating saw is equipped with a
trigger switch to turn the saw on and off and
to control the speed.
1. Before you turn on the tool, open the
lock-off button by pressing from the
right side (FIG. 5A).
FIG. 5A
Close
Lock-Off Button
Open
2. To turn the saw on, depress the trigger
switch (FIG. 5B).
FIG. 5B
Variable-Speed
Trigger Switch
3. To turn the saw off, release the trigger
switch.
4. The variable-speed trigger switch
delivers higher speed with increased
trigger pressure and lower speed with
decreased trigger pressure.
NOTICE: Engage the lock-off button by
pressing from the left side when the tool
is not in use.
Loading ...
Loading ...
Loading ...