Loading ...
Loading ...
Loading ...
Page 7
HOW TO CHARGE THE
BATTERY PACK WITH THE
CHARGER (FIG.1)
A fully discharged battery pack will charge
about 30-125 minutes (depending on battery
type) in the desired surrounding temperature.
1. Charge the battery pack with the correct
charger.
2. Connect the charger to a power supply.
ASSEMBLY
WARNING:
If any part is broken
or missing, do not attempt to plug in the
power cord until the broken or missing part
is replaced. Failure to do so could result in
possible serious injury.
WARNING:
Do not attempt to
modify this tool or create accessories not
recommended for use with this tool. Any
such alteration or modication is misuse
and could result in a hazardous condition
leading to possible serious injury.
WARNING:
Your tool should
never be connected to the power source
when you are assembling parts, making
adjustments, cleaning, or when it is not
in use. Disconnecting the tool will prevent
accidental starting, which could cause
serious personal injury.
CONTENTS
FLEXPOWER
®
Battery charger, instruction
manual
UNPACKING
1. This product has been shipped
completely assembled.
2. Carefully remove the tool from the box.
Make sure that all items listed in the
packing list are included.
3. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
4. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
FIG. 1
OPERATION
3. Attach the battery pack to the charger
by aligning the raised ribs of the battery
pack with the slot in the charger . Slide
the battery pack onto the charger.
4. The charger will communicate with the
battery pack’s circuitry to evaluate the
condition of the battery pack.
5. During normal charging, the green LED
on the charger will flash continuously,
the green LEDs on the battery pack will
flash one by one from right to left.
6. After charging is complete, the green
LED on the charger will be on, the green
LED on the battery will remain on for
approximately 30 minutes and then turn
off. The power-indicator LED lights will
not illuminate when the battery pack
power-indicator button is pressed while
the battery pack is on the charger.
7. The battery pack will fully charge, but
will not overcharge, if left on the charger.
Loading ...
Loading ...
Loading ...