Loading ...
Loading ...
Loading ...
– 3
Connect the steel pipe of the high pressure
cleaner to the surface cleaner and tighten it
with a wrench (opening width 24).
Caution
A strong wastewater jet will emerge from
the hose connection. Do not use the sur-
face cleaner without a hose.
Insert the hose into the hose connection
and secure by rotating.
Route the other end of the hose to a
drain.
Note:
The free end of the hose can be attached
by means of the included Velcro tape (e.g.
on a drain grid).
Hold the hand spray gun and the spray
pipe firmly with both hands.
Guide the surface cleaner so that it re-
mains close to the surface to be
cleaned.
1 Connectiing piece
2 Screw
Place the connecting piece vertically.
Turn in the enclosed screw in order to
hold the joint firmly.
1 Adapter (order no.: 4.402-071.0)
2 Hand spraygun
Screw the adapter to the connection
and tighten it with a wrench (key width
22).
Screw the hand spray gun on the adapt-
er, align it and tighten it with a wrench
(key width 27).
Floor cleaning Wall cleaning
9EN
Loading ...
Loading ...
Loading ...