Loading ...
Loading ...
Loading ...
– 4
Caution
A strong wastewater jet will emerge from
the hose connection. Do not use the sur-
face cleaner without a hose.
Insert the hose into the hose connection
and secure by rotating.
Route the other end of the hose to a
drain.
Hold the appliance at the handle while
cleaning the wall.
Guide the surface cleaner so that it re-
mains close to the surface to be
cleaned.
Protect the appliance against frost.
Do not allow bristles to deform during
storage.
Note: In order to ensure a good suction re-
sult, please do not place the surface clean-
er FRV 30 onto the bristle crown after use.
To protect the brush bar from damages,
you can also remove it while storing the
FRV 30.
Rinse the steering rollers with clear wa-
ter after use and spray with creeping oil
after they have dried.
Rotation arm does not rotate:
Check if the cleaning nozzles are dirty.
Vacuum performance decreasing:
Bristle crown worn - replace bristle
crown.
Suction channel/suction hose blocked -
clean suction channel and suction hose.
Injector nozzle blocked - clean the in-
jector nozzle.
Care
Accessories
Accessories Order number
Rubber lip to increase
the suction effect
2.642-910.0
Hose fastener (suction
cup to install on
smooth surfaces)
2.642-528.0
Dirt catcher (coarse
dirt separator)
2.642-532.0
Hose support (wall
mount)
2.042-001.0
Connection bushing
(hose coupling to ex-
tend hose)
6.902-077.0
Brush crown 6.371-203.0
Extension hose 4.440-939.0
Troubleshooting
10 EN
Loading ...
Loading ...
Loading ...