Loading ...
Loading ...
Loading ...
Automatic shutdown function
The product has an automatic shutdown function that
stops the product if it is not used. The product shuts
down after 30 minutes.
Functional behaviour
The product can be used with one battery in any of the
pockets or with two batteries. If two batteries are
installed the product will start to use the battery in the
lower pocket before switching to the upper battery.
Under normal condition the product will switch to the
second battery when the first one is out of power.
Under special circumstances the product will switch
several times to cool the batteries.
The state of charge on the handle display shows the
total amount of power from the batteries.
If BLi10 or BLi100 is used in the product, the rpm will
be limited to protect the batteries.
To prevent overheating of the batteries when battery
switching is not possible, the product will lower the rpm
to ensure full runtime.
To operate the cruise control function
1. Push the power trigger to select the optimal airflow
for your work.
2. Push the Cruise control button to set the selected
airflow. The LED comes on.
3. Continue to operate with the selected airflow
without the power trigger pushed.
4. To increase the airflow, push the power trigger.
When the power trigger is released, the airflow
goes back to the airflow that was set in step 2.
5. Release the power trigger and push the Cruise
control button to stop the Cruise control function.
To increase the airflow to maximum
1. Start the product. Refer to
Operation on page 15
.
2. Push the Boost mode button to enable maximum
airflow when the power trigger is pushed. The LED
comes on to show that the Boost mode function is
on. The Boost mode function has no time limit.
3. Push the Boost mode button again to stop the
Boost mode function.
16 1166 - 007 - 30.06.2020
Loading ...
Loading ...
Loading ...