Loading ...
Loading ...
Loading ...
To put the product in transportation
mode
1. Turn the blower tube until it points up.
2. Connect the transport clip.
Operation
Introduction
WARNING: Read and understand the
safety chapter before you use the product.
To connect the battery to the product
WARNING: Only use Husqvarna
original batteries in the product.
1. Charge the battery fully.
2. Push the battery into the battery holder of the
backpack. The battery locks into position when you
hear a click.
CAUTION: If the battery does not
move easily into the battery holder, the
battery is not installed correctly. This
can cause damage to the product.
To start the product
1. Push and hold the start/stop button until the green
LED light on the user interface comes on.
2. Use the power trigger to control the speed.
To stop the product
1. Release the power trigger.
2. Push and hold the start/stop button until the green
LED light goes off.
3. Push the release buttons on the battery and
remove the battery from the product.
1166 - 007 - 30.06.2020 15
Loading ...
Loading ...
Loading ...