Loading ...
Loading ...
Loading ...
6. Align the knobs (I) to each side of the joint swivel
(F).
F
I
J
K
7. Attach the operation handle (J) to the guide track
(K) of the joint swivel (F). Make sure that the screw
on the operation handle is on the bottom side of the
control pipe.
8. Tighten the screw on the operation handle fully.
9. Connect the intermediate pipe (L) to the joint swivel
(F). Make sure that the knob (I) aligns with the
guide track of the intermediate pipe.
F
L
N
M
I
10. Turn the intermediate pipe (L) fully to lock the joint
swivel (F) and the intermediate pipe.
11. Connect the blow pipe (M) to the intermediate pipe
(L). Make sure that the knob (N) on the
intermediate pipe points up and goes into the guide
track of the blow pipe.
12. Turn the blow pipe fully to lock the intermediate
pipe and the blow pipe.
13. Attach the cable clamp to the flexible tube. Put the
cable of the operation handle in the loop on the
cable clamp.
.
To adjust the harness
A correctly adjusted harness and product makes
operation easier. Adjust the harness to give the best
operation position.
1. Put on the harness of the product.
C
B
A
2. Connect the hip strap with the clip (C). Tighten the
strap until the weight of the product is on your hips.
3. Tighten the side straps (B) until the product is tight
against your body.
4. Connect the chest strap to the clip (A).
5. Tighten the strap.
14
1166 - 007 - 30.06.2020
Loading ...
Loading ...
Loading ...