Loading ...
Loading ...
Loading ...
21
NOTE: If you are unable to resolve an issue using the troubleshooting guide above, please
E06/E07: Motor
Abnormality
The motor wire is not
connected, or the motor is
damaged.
Check motor wires to see if the
motor is connected. If the wire has
been punctured or damaged, you
will need to replace it. If the problem
is not rectified, you may need to
replace the motor.
E08:Control Board
abnormality
The control board is not
connected.
Check the upper and middle wires to
see if the control board is connected.
If the wire has been punctured or
damaged, you will need to replace it.
If the problem is not rectified, you
may need to replace the control
board.
E09/E10: Motor
abnormality
The motor is damaged, or
a moving part of the
treadmill is stuck and
therefore the motor is
unable to rotate properly.
Inspect moving parts of the treadmill
to ensure that they are operating
correctly.
Replace the motor if necessary.
E11/E12: Message failure
Wires from the console and
bottom control board are
not properly connected.
Check wire connections from the
console to the control board. If the
wire has been punctured or
damaged, you will need to replace it.
If the problem is not rectified, you
may need to replace the control
board.
Loading ...
Loading ...
Loading ...