Loading ...
Loading ...
Loading ...
▶
▶
- Always unplug the power cord before cleaning the lter.
- The pre-lter can be reused after dust removal and cleaning with water.
- If the pre-lter is not cleaned for a long time, the product performance may decrease
and problems may occur.
- The ne dust lter, deodorization lter and HEPA lter cannot be reused after
cleaning. Never clean them with water.
■ Pre-lter (clean every 2-4 weeks)
1. Pull both sides of the front cover to open.
2. Pull the pre-lter handle while taking it out to
separate it from the ne dust lter.
∗ Be careful that dust doesn't fall out during
removal.
3. Remove dust with water or a vacuum cleaner
depending on the degree of contamination.
∗ Be careful not to let dust enter the purier while cleaning.
4. Push the completely dry pre-lter all the way
into the purier to install it. Close the front
cover again.
∗
When you assemble the ne dust lter, be
sure that the blue side of the lter must be
at the front
CLEANING METHOD
Tips
Loading ...
Loading ...
Loading ...