Loading ...
Loading ...
Loading ...
turn the Current Regulation Adjustment Knob (#3)
counterclockwise to make the (CC) indicator come on, the current-
limit protection point is set at this point and can be decreased or
increased with Knob (#3).
3. Precautions:
3.1 After every use, put the unit in a place where it is dry,
ventilation is good and where it will stay clean. If this unit is
not in use for a long periods of time, please remove the plug
before storing it.
3.2 These units should only be repaired by qualified repair
technicians, as some components retain an electrical charge and
can cause serious harm or even cause a fatality if handled
incorrectly.
3.3 When this power supply is used with Wireless Power
Emission Equipment, the displayed voltage and current may
not be stable. (The displays may become disrupted by the high
output radio frequencies) Please use a low-resistance analog
meter to choose more accurate settings under these
circumstances.
Warranty Statement:
Circuit Specialists, Inc. warrants this product to be free from defects caused by
workmanship or production error for a period of 12 months after the initial purchase date.
Circuit Specialists Inc. will, at its’ option, repair or replace any defective unit with a
working unit after the defective product has been returned, freight prepaid to Circuit
Specialists, Inc. Should you have a defect that is covered by this limited warranty, please
contact Circuit Specialists, Inc. (1-800-528-1417/ 480-464-2485) for an RMA number
prior to returning the unit. Products that are damaged from misuse are not covered by this
limited warranty.