Loading ...
Loading ...
NOTE: CSI5030 can not work for long hours at full load due to
excessive heat build up. Below are estimated run times. Actual
performance is affected by environmental factors including
ventilation in area of use.
50V – 30A = 1 Hour at 1500Watts (FULL CAPACITY,
Uninterupted)
50V – 25A = 2 Hours at 1250Watts Uninterupted
50V – 20A = 6 Hours at 1000Watts Uninterupted
2: OPERATION
2.1 The locations and functions of the knobs and switches on the panel
(1) Current Display: to display the output current.
(2) Voltage Display: to display the output voltage.
(3) Current Regulation Adjustment Knob and to set the current-limit
protection point.
(4) Voltage Regulation Adjustment Knob: to adjust the output voltage
value.
(5) CC : Constant Current state LED.
(6) CV: Constant Voltage state LED.
(7) The positive output terminal. To be connected with the positive end
of the load----Normally for test, examine and repair, or to be
Loading ...
Loading ...