Loading ...
Loading ...
Loading ...
(71,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
or a sharp turn.
3. For Outback/Subaru Outback
Wilderness models, adjust the seat-
back to the upright position.
WARNING
When you intend to install a child
restraint system in the rear center
seating position, if the child restraint
system does not fit snugly against
the contours of the rear center seat
cushion, install the child restraint
system on the window-side seating
position to be safe. For details, refer
to “Where to Place a Child Restraint
System” �P63.
4. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by
its manufacturer.
– When a child restraint system is
installed in the rear center seating
position of an Outback/Subaru
Outback Wilderness, pass the rear
center seatbelt through the belt
guide properly. For details, refer to
“Rear center seatbelt on Outback/
Subaru Outback Wilderness”
�P52.
5. Insert the tongue plate into the buckle
until you hear a click.
6. Take up the slack in the lap belt.
7. Pull out the seatbelt fully from the
retractor to change the retractor over
from the Emergency Locking Retractor
(ELR) to the Automatic Locking Re-
tractor (ALR) function. Then, allow the
belt to rewind into the retractor. As the
belt is rewinding, clicks will be heard
which indicate the retractor functions
as ALR.
8. Before having a child sit in the child
restraint system, try to move it back
and forth and right and left to check if it
is firmly secured. Sometimes a child
restraint system can be more firmly
secured by pushing it down into the
seat cushion and then tightening the
seatbelt. It should not be possible to
move the child restraint system more
than 1 in (2.5 cm) in any direction along
the seatbelt path.
– CONTINUED –
Child Restraint Systems
69
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...