Loading ...
Loading ...
Loading ...
(274,1)
北米Model "A2630BE-A" EDITED: 2023/ 1/ 10
washer solution will be sprinkled all
over the windshield or rear window.
. Grease, wax, insects, or other mate-
rial on the windshield or the wiper
blade results in jerky wiper opera-
tion and streaking on the glass. If
you cannot remove the streaks after
operating the windshield washer or
if the wiper operation is jerky, clean
the outer surface of the windshield
and rear window using a sponge or
soft cloth with a neutral detergent or
mild-abrasive cleaner. Do not, how-
ever, use detergent to clean the
blade rubbers. Use only a sponge
or soft cloth (and no neutral deter-
gent or mild abrasive cleaner) when
you clean the blade rubbers. If you
wipe the rubber of the blade
strongly, the black coating compo-
nent will peel off, which will cause
the wiper to judder. Also, after wip-
ing it off, check that the rubber has
not come loose. After cleaning the
window glass and wiper blade rub-
bers, be sure to rinse them with
clean water. Rinse the window until
the water does not form beads on the
glass. This indicates that the glass is
clean.
. If you cannot eliminate the streaking
even after following this procedure,
replace the wiper blades (or blade
rubbers) with new ones. For replace-
ment instructions, refer to “Replace-
ment of Wiper Blades” �P547.
. If the wipers do not operate when the
wiper switch is in the “
” position,
turn the wiper switch to the “
”
position. In this case, contact your
SUBARU dealer.
& Windshield Wiper and
Washer Switches
s03am01
The wiper operates only when the ignition
switch is in the “ON” position.
! Windshield wipers
s03am0101
: Mist (for a single wipe)
: Off
: Intermittent
: Low speed
:
High speed
To turn the wipers on, push the wiper
control lever down.
To turn the wipers off, return the lever to
the “
” position.
Wiper and Washer
272
Loading ...
Loading ...
Loading ...