Loading ...
Loading ...
Loading ...
(57,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
3. Allow the retractor to roll up the belt.
You should hold the webbing end and
guide it back into the retractor while it is
rolling up. Neatly store the tongue plate
in the recess and then insert the
anchor tongue plate into the slot.
CAUTION
Observe the following precautions.
Otherwise, the tongue plate can hit
against the trim, causing damage to
the trim.
. Do not allow the retractor to roll
up the seatbelt too quickly.
. Have the seatbelt fully rolled up
so that the tongue plates are
neatly stored.
& Seatbelt Maintenance
s01ae07
To clean the seatbelts, use a mild soap and
lukewarm water. Never bleach or dye the
belts because this could seriously affect
their strength.
Inspect the seatbelts and attachments
including the webbing and all hardware
periodically for cracks, cuts, gashes, tears,
damage, loose bolts or worn areas. Re-
place the seatbelts even if only minor
damage is found.
CAUTION
. Keep the belts free of polishes,
oils, chemicals and particularly
battery acid.
. Never attempt to make modifica-
tions or changes that will prevent
the seatbelt from operating prop-
erly.
1-6. Seatbelt Extender
s01ai
If the front seatbelts are not long enough to
permit the tongue plate to engage with the
seatbelt buckle, an optional seatbelt ex-
tender is available from your SUBARU
dealer. When ordering an extender, only
order one particularly designed for your
vehicle. See your SUBARU dealer for
assistance.
The extender adds approximately 8 inches
(200 mm) of length and it can be used for
either the driver or front passenger seating
position.
For the safety of others, the extender
should be removed after each use, espe-
cially if the next person using the seatbelt
does not need one.
– CONTINUED –
Seatbelt Extender
55
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...