Loading ...
Loading ...
Loading ...
SEr LYSTr 2
159
I59
26
t59 t59 158
75
1. Attach the Support tube (26) between the upright tubes (4 & 5) with four
Button Head Socket Bolts (159). Tighten bolts firmly.
2. Place the Beverage Holder (158) on top of the Support tube (26) as shown in
the illustration.
3. Place the magnet of the safety key (75) in between the Start and Stop
buttons (if it isn't already attached). The treadmill will not function without this
in place.
4. Check to make sure all bolts and screws are completely tightened.
#159. 5/16"x3/4"
Button Head Socket
Bolts (4 pcs)
#75. Safety Key
ASSEMB/Y , 8
120
_ 120 ....
120
120
i20
62
1. Attach the Console mast covers (62 & 63) to the Frame Base (2) with six
Tapping Screws (120). Tighten screws using the Combination M5 Allen
Wrench & Phillips Head Screw Driver (131).
#120. 5x16mm
Tapping Screws(6 pcs)
11 F63 / F65 TREADMILL
Loading ...
Loading ...
Loading ...