Dremel MM35-01 Operating/Safety Instructions

Loading ...

-12-

FIG. 10FIG. 9

CORRECT: Sand with a smooth

back and forth motion, allowing the

weight of the tool to do the work.

INCORRECT: Avoid sanding with

only the tip of the pad. Keep as

much sand paper in touch with the

work surface as possible.

CORRECT: Always sand with the

pad and sandpaper flat against the

work surface. Work smoothly in a

back and forth motion.

INCORRECT: Avoid tipping the

pad. Always sand flat.

CORRECT: Always cut with a

smooth back and forth motion.

Never force the blade. Apply light

pressure to guide the tool.

INCORRECT: Do not twist the tool

while cutting.This can cause the

blade to bind.

CORRECT: Make sure flexible

scraper blade flexes enough

INCORRECT: Avoid screw head

touching surface with flexible

scraper blade.

Please refer to figures 9 and 10 for further instruction on how to use your Dremel Multi-Max™.

Following these instructions will allow you to get the highest performance out of your oscilating tool.

1600A014GW MM35 08-18.qxp_MM35 8/23/18 9:06 AM Page 12

Loading ...

Dremel MM35-01 Multi-Max 3.5 Amp Oscillating Tool Kit