Loading ...
Loading ...
Loading ...
64
©
2018 DJI All Rights Reserved.
INSPIRE 2 SERIES
User Manual
OR
Stopping the Motors
There are two methods to stop the motors.
Method 1: When Inspire 2 has landed, push the left stick down , then conduct the same CSC that
was used to start the motors, as described above . Motors will stop immediately. Release both
sticks once motors stop.
Auto Take-off and Auto Landing
Auto Takeoff
Use auto takeoff only if the Aircraft Status Indicators are blinking green. Follow the steps below to
use the auto takeoff feature:
1. Launch the DJI GO 4 app, and enter “Camera” page.
2. Complete all steps on the pre-ight checklist.
3. Tap“
”, and conrm that conditions are safe for ight. Slide the icon to conrm and takeoff.
4. Aircraft takes off and hovers at (1.2 meters) above ground.
Aircraft Status Indicator blinks rapidly when it is using the Vision System for stabilization.
The aircraft will automatically hover below 10 meters. It is recommended to wait until there
is sufcient GPS lock before using the Auto Take-off feature.
Auto-Landing
Use auto-landing only if the Aircraft Status Indicator is blinking green. Follow the steps below to use
the auto-landing feature:
1. Tap on
, to ensure the landing condition is ideal. Slide to conrm.
2. Abort landing process immediately by using the
button on the screen.
3. a. When Landing Protection determines that the ground is suitable for landing, the Inspire 2 will
land gently.
b. If Landing Protection determines that the ground is not suitable for landing, the Inspire 2 will
hover and wait for pilot conrmation.
c. If Landing Protection is not operational, the DJI GO 4 app will display a landing prompt when
the Inspire 2 descends below 0.7 meters. Pull down on the throttle or use the auto landing
slider to land.
4. Aircraft will land and turn off automatically.
Starting/Stopping the Motors
Starting Motors
A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom in-
ner or outer corners to start the motors. Once the motors have started spinning, release both sticks
simultaneously.
Loading ...
Loading ...
Loading ...