Loading ...
Loading ...
Loading ...
36
©
2018 DJI All Rights Reserved.
Remote Controller
Remote Controller Prole
The Inspire 2 remote controller is a multi-function wireless communication device that integrates a dual
frequency video downlink system and the aircraft remote control system. The 5.8 GHz video downlink
is recommended for urban areas to resist interference, 2.4 GHz is good for long transmission distances
in open areas. The remote controller features a number of camera control functions, including photo/
video capture as well as gimbal control. The battery level is displayed via LED indicators on the front
panel of the remote controller. When in dual remote controller mode, each of the two remote controllers
separately control aircraft and camera and can be up to 328 feet (100m) apart.
Compliance Version: The remote controller is compliant with local compliance and
regulations.
Operating Mode: Control can be set to Mode 1 or Mode 2, or to a custom mode.
Mode 1: The right stick serves as the throttle.
Mode 2: The left stick serves as the throttle.
Do not operate more than 3 aircrafts within in the same area (size equivalent to a soccer
eld) to prevent transmission interference.
Remote Controller Operations
Powering On And Off The Remote Controller
The Inspire 2 remote controller is powered by a 2S rechargeable battery with a capacity of
6000mAh. The battery level is indicated by the Battery Level LEDs on the front panel. Follow the
steps below to power on your remote controller:
1. When powered off, press the Power Button once and the Battery Level LEDs will display the
current battery level.
2. Then, press and hold the Power Button to power on the remote controller.
3. The Remote Controller will beep when it powers on. The Status LED will blink green (slave remote
controller blinks solid purple) rapidly, indicating that the remote controller is linking to the aircraft.
The Status LED will show a solid green light when linking is completed.
4. Repeat step 2 to power off the remote controller after nish using it.
Loading ...
Loading ...
Loading ...