Loading ...
Loading ...
Loading ...
P a g e |
14
web: brohn.com.au
Check that oven doesn't move after mounting. If oven isn't mounted in
accordance with instructions, there is a risk of tilt over during operation.
4.3 ELECTRICAL CONNECTION
IMPORTANT!
This appliance should be installed and connected to the power supply by a licensed
electrician or warranty void.
The connection must be in accordance with the current versions of the following:
AS/NZS 3000 Wiring Rules
Electricity Safety Regulations 2010
The installation instructions within this user manual
Wiring requirements:
The oven MUST be installed in compliance with:
Wiring connections in AS/NZS 3000 Wiring Rules.
Local regulations, building codes, other statutory regulations and standards.
Make sure supply voltage corresponds with your mains supply voltage.
This appliance must be earthed.
Connection to the power supply:
Below connection information is for reference only.
The oven comes pre-terminated with the fitted cord and appropriately rated plug.
The socket-outlet fitted connection to the final sub-circuit in the fixed wiring that is
intended to supply this appliance is preferable. If the power point is fitted it must be
accessible with the appliance installed.
The oven supplied with the fitted cord and no plug fitted.
The junction connection using appropriately rated terminals and a junction box
must be arranged to the final sub-circuit in the fixed wiring that is intended to supply
this appliance.
The hard wiring connection:
Remove terminal cover plate from rear panel of the oven.
Fit wires through and connect to the appropriate terminals.
Loading ...
Loading ...
Loading ...