Loading ...
Loading ...
Loading ...
44
Oven maintenance
Removing the shelf supports
To remove the shelf supports:
1. Pull the frame towards the inside of the oven
to unhook it from its groove A, then slide it
out of the seats B at the back.
1. When cleaning is complete, repeat the above
procedures to put the self supports back in.
Replacing the oven light
The oven lights will automatically turn ON when the
oven door is opened. The oven lights may also be
manually operated by turning the oven tempera-
ture knob to the bulb icon (see “Inside lights”).
The oven light bulb is covered by a glass shield. The
glass shield can be removed to be cleaned manu-
ally or for replacing the oven light bulb. THIS
GLASS SHIELD MUST BE IN PLACE WHENEVER
THE OVEN IS IN USE.
To replace the oven lights:
1. Turn the power off at the main source or
unplug the appliance.
2. Remove the bulb cover using a tool that
cannot scratch the enamel surfaces (e.g. a
spoon).
1. Slide out the light bulb and remove it.
2. Install the new light bulb.
IMPORTANT
This has to be done in order to replace the oven
lights and enables you to clean the oven side
walls.
• Grasp the shelf supports firmly by both ends
to prevent scratching the enamel of the oven
cavity when removing them.
• Wear protective gloves.
WARNING
ELECTRIC SHOCK HAZARD -
Make sure the range is unplugged
and that all parts are COOL
before replacing oven light. Wear
a leather-faced glove for protec-
tion against possible broken glass
or burns.
IMPORTANT
The oven is fitted with two 120V - 40W halogen
light bulbs.
NOTE
Do not allow your fingers to touch the new bulb
when installing it. This will shorten the life of the
new bulb. Use a paper towel to cover the new
bulb when installing it.
CARE AND CLEANING
Loading ...
Loading ...
Loading ...